STIHL TS 410 2 STROKE PETROL (12 inch blade) CUT OFF SAW/CUTTER

SOLD IN VERY GOOD CONDITION/WORKING ORDER

SERVICED SAW STARTS RUNS AND CUTS ALL A1

c/w NEW DIAMOND BLADE FITTED

COLLECT IN PERSON ONLY

NO OFFERS ITS PRICED TO SELL THANK YOU!!!

NO RETURNS WARRANTY GIVEN ON SAWS

50:1 PETROL TO 2 STROKE OIL RATIO MIX

PRODUCT INFORMATION

Compact and robust, the STIHL TS 410. Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary. Extremely low vibration levels (3.9m/s). High performance engine with stratified charge system. Compact design and optimised balance for excellent cutting and guide characteristics. For use with 300mm cutting wheel. ElastoStart, primer pump and pression valve. Bayonet filler cap for tool free opening. Can be hand held or used with the FW 20 cart. Supplied with abrasive cutting wheel.

Reduced-Emission Engine Technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in bustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Pre-Separation Air Filtration System
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter pared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

Anti-Vibration System
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

Reduced-Emission Engine Technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in bustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Pre-Separation Air Filtration System
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter pared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

Manual Fuel Pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

Semi Automatic Drive Belt Tensioning
Light, consistent re-tensioning increases the service life of the belts and shaft bearings.

Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter es clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in bustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

pression Valve
The pression valve allows some of pression pressure in the cylinder to escape, so less force on the starter rope is needed.

Ergonomic Grip Position
The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent fort in any working position.

SPECIFICATIONS

Displacement: 66.7cm.

Power output: 3.2kW / 4.4bhp.

Diameter of abrasive wheel: 300mm.

Maximum cutting depth: 100mm.

Vibration levels left/right: 3.9/3.9m/s.

Sound power level: 109.0dB(A).

Sound pressure level: 98.0dB(A).

Weight: 9.4kg.